[1]王祝成,孟桂祥,姚 胜,等.ASME PTC4.1—1964标准和ASME PTC4—2013标准关于锅炉效率计算的区别[J].热力发电,2018,(11):1-6.[doi:10.19666/j.rlfd.201803102]
 WANG Zhucheng,MENG Guixiang,YAO Sheng,et al.Difference in boiler efficiency calculation between ASME PTC4.1—1964 and ASME PTC4—2013[J].Thermal Power Generation,2018,(11):1-6.[doi:10.19666/j.rlfd.201803102]
点击复制

ASME PTC4.1—1964标准和ASME PTC4—2013标准关于锅炉效率计算的区别

参考文献/References:

[1] 电站锅炉性能试验规程: GB/T 10184—2015[S]. 北京: 中国标准出版社, 2015: 1-51.
Performance test codes for utility boiler: GB/T 10184—2015[S]. Beijing: China Standards Press, 2015: 1-51.
[2] 电站锅炉性能试验规程: GB 10184—1988[S]. 北京: 中国标准出版社, 1988: 1-38.
Performance test codes for utility boiler: GB 10184—1988[S]. Beijing: China Standards Press, 1988: 1-38.
[3] 锅炉机组性能试验规程: ASME PTC4.1—1964[S]. 美国机械工程师协会, 1964: 1-43.
Fired steam generators performance test codes: ASME PTC4.1—1964[S]. The American Society of Mechanical Engineers, 1964: 1-43.
[4] 锅炉性能试验规程: ASME PTC4—1998[S]. 美国机械工程师协会, 1998: 1-85.
Fired steam generators performance test codes: ASME PTC4—1998[S]. The American Society of Mechanical Engineers, 1998: 1-85.
[5] 锅炉性能试验规程: ASME PTC4—2008[S]. 美国机械工程师协会, 2008: 1-95.
Fired steam generators performance test codes: ASME PTC4-2008[S]. The American Society of Mechanical Engineers, 2008: 1-95.
[6] 锅炉性能试验规程: ASME PTC4—2013[S]. 美国机械工程师协会, 2013: 1-122.
Fired steam generators performance test codes: ASME PTC4—2013[S]. The American Society of Mechanical Engineers, 2013: 1-122.
[7] 电站锅炉性能试验规程[M]//国外热机规程汇编. 西安: 能源部西安热工研究所, 1989: 1-80.
Performance test codes for utility boiler[M]//Compilation of Foreign Heat Engine Codes. Xi’an: Xi’an Thermal Power Research Institute, Ministry of Energy, 1989: 1-80.
[8] 苏联全苏热工研究院所. 锅炉机组热力计算标准方法[M].北京锅炉厂, 译. 北京: 机械工业出版社, 1976: 11-27.
All Soviet Institute of Thermal Engineering Compile. Standard method for thermodynamic calculation of boiler units[M]. Beijing Boiler Factory, translated. Beijing: China Machine Press, 1976: 11-27.
[9] 丁立新. 电厂锅炉原理[M]. 北京: 中国电力出版社, 2009: 32-53.
DING Lixin. Boiler principle[M]. Beijing: China Electric Power Press, 2009: 32-53.
[10] 阎维平, 云曦. ASME PTC4—1998锅炉性能试验规程的主要特点[J]. 动力工程, 2007(2): 174-178.
YAN Weiping, YUN Xi. Essentials of boiler performance test code ASME PTC4—1998[J]. Journal of Power Engineering, 2007(2): 174-178
[11] 刘振琪, 刘琦. 电站锅炉性能考核试验技术简介[J]. 锅炉技术, 2003(7): 58-62.
LIU Zhenqi, LIU Qi. Brief introduction to performance assessment test technology of power plant boiler[J]. Boiler Technology, 2003(7): 58-62.
[12] 王祝成, 施延洲. GB 10184—88标准中排烟温度修正方法的改进探讨[J]. 锅炉技术, 2011(5): 56-59.
WANG Zhucheng, SHI Yanzhou. Discussion on improvement of correction method of outgoing gas temperature in GB 10184—88 codes[J]. Boiler Technology, 2011(5): 56-59.
[13] 电力名词审定委员会. 电力名词[M]. 2版. 北京: 科学出版社, 2009: 411-416.
Electric Power Nouns Verification Committee. Electric power nouns[M]. 2nd ed. Beijing: Science Press, 2009: 411-416.
[14] 火力发电厂技术经济指标计算方法: DL/T 904—2015[S]. 北京: 中国电力出版社, 2015: 10-40.
Calculating method of economical and technical index for thermal power plant: DL/T 904—2015[S]. Beijing: China Electric Power Press, 2015: 10-40.
[15] 孟勇, 吴生来. ASME PTC4.1计算循环流化床锅炉效率的基本方法[J]. 热力发电, 2003, 32(10): 53-55.
MENG Yong, WU Shenglai. The basic method of calculating the efficiency of circulating fluidized bed boiler by ASME PTC4.1[J]. Thermal Power Generation, 2003, 32(10): 53-55.
[16] 许传凯. 燃煤锅炉燃烧优化技术——烟气中一氧化碳的检测[J]. 热力发电, 1989, 18(2): 55-60.
XU Chuankai. Combustion optimization technology of coal-fired boilers: detection of carbon monoxide in flue gas [J]. Thermal Power Generation, 1989, 18(2): 55-60.
[17] 周平, 张广才, 严晓勇, 等. 600 MW机组对冲燃煤锅炉尾部CO浓度偏高的调整试验[J]. 热力发电, 2014, 43(12): 82-88.
ZHOU Ping, ZHANG Guangcai, YAN Xiaoyong, et al. Operation optimization on high co emissions of a 600 MW unit swirl-opposed firing boiler after low-NOx burner retrofitting[J]. Thermal Power Generation, 2014, 43(12): 82-88.
[18] 刘琦, 吴生来. 华能福州电厂1号锅炉飞灰可燃物升高原因分析[J]. 热力发电, 1998, 27(6): 56-59.
LIU Qi, WU Shenglai. Analysis on the rise of fly ash combustibles in No. 1 boiler of Huaneng Fuzhou Power Plant[J]. Thermal Power Generation, 1998, 27(6): 56-59.
[19] 王春昌. 电站燃煤锅炉煤粉细度控制值研究[J]. 热力发电, 2011, 40(1): 48-51.
WANG Chunchang. Study on the fineness controlled value of pulverized coal for coal-fired boilers in thermal power plants[J]. Thermal Power Generation, 2011, 40(1): 48-51.
[20] 杨涛, 倪舒云, 张再刚, 等. 某电厂4号锅炉飞灰可燃物含量偏高的原因分析及解决措施[J]. 热力发电, 2012, 41(12): 111-112.
YANG Tao, NI Shuyun, ZHANG Zaigang, et al. High content of combustible matter in fly ash for NO.4 boiler in a power plant: reason analysis and countermeasures[J]. Thermal Power Generation, 2012, 41(12): 111-112.
[21] 张安国. 电站磨煤机及制粉系统选型导则[M]. 北京: 中国电力出版社, 2004: 7-9.
ZHANG Anguo. Guide for type selection for pulverizers and pulverizing systems of power station[M]. Beijing: China Electric Power Press, 2004: 7-9.
(责任编辑 马昕红)

备注/Memo

王祝成(1971—),男,硕士,高级工程师,主要研究方向为锅炉性能试验及优化运行技术,wangzhucheng@tpri.com.cn。

更新日期/Last Update: 2018-10-25